|
|
|
Pinspotters AMF
|
|
Besides rebuilding that assembly, you can try spraying WD40 on the latch bushings, gently tap it with a hammer a few times, and manually operate it seceral times to work the lube in there and free it up. Usually the bushings dry up and they get stic
|
|
Pinspotters AMF
|
|
I am afraid to weld anything, its just scary and I'm not that good at it anyway. For me, because of the fear factor and the potential danger, I just don't weld.
|
|
Pinsetters Brunswick
|
|
Originally Posted By: Steve Stafford (JBEES)Why not...I will compare it to the one I have and see how close they are. Steve, how did it compare? I had a knee replaced in late July and just getting back into service, so to speak. I would like to have
|
|
Pinsetters Brunswick
|
|
cool. good one. I see it now on the middle arm. Goood quick fix. You got lucky on that one that you had enough of the arm still attached to the main part of the toggle lever to do what you did. On a side note, I started wondering if the scissor spr
|
|
Pinsetters Brunswick
|
|
That was an actual LOL!
|
|
Pinsetters Brunswick
|
|
It looks like you drilled angled holes on top and bottom and drove some screws and it held? On the rig?? BRILLIANT!!
|
|
Pinsetters Brunswick
|
|
I just knew that information would come in handy to someone.. Hope this solves your problem. Of course the Poly-Vee Kits come with a 1" pulley, the 1 5/8" pulley is 53-520159-000 Poly V Sheave (1-5/8" Dia.) They are not cheap either..
|
|
Pinsetters Brunswick
|
|
Originally Posted By: Mechanicksorry, can't really see in the pic exactly what you did? maybe you can elaborate on what you did to fix or post a bigger pic Look at the two bolts, on the top. I took the broken half and bolted to to what was left of
|
|
Pinspotters AMF
|
|
My input on the subject is this. Twice I have witnessed fires inside centers caused by welding, The first time it was my head mech. (This was the same guy that I saved when a mach OOR'd on his back when he crawled on the pindeck after forgetting to
|
|
Pinsetters Brunswick
|
|
sorry, can't really see in the pic exactly what you did? maybe you can elaborate on what you did to fix or post a bigger pic
|
|
Brunswick GS Pinsetters
|
|
I'm off till saturday night. I'll check what I can then.
|
|
Pinsetters Brunswick
|
|
Originally Posted By: A2nut glad you found it DONO as Badwrench states,it's the simple stuff that will confuse us at times. been there, did that. On the subject of simple stuff. Two week ago I had a camera go out on my Qubica scoring, go to desk an
|
|
Pinsetters Brunswick
|
|
Come in at 3:30 Wed night, 32 team league starting in two hours no place to move them and I have a scissor spring on the carpet along with a piece of the toggle lever. This is what I did to make it work. Fixed it on the machine in about 45 minutes.
|
|
Pinsetters Brunswick
|
|
I think the new Bruns CC belts are good now since they came up with the latest design but I'm wondering if they use silicone release agent during molding because the first set I ever got, I had problems with after cleaning with ST-21 (never happens)
|
|
Pinspotters AMF
|
|
Mike and mods, i do not mean to further the thread on the welding on machines inside...but i do have a valid question. Is the practice of welding anything normally done outside the bowling centers? ....or just off of the machines? Our mech does we
|
|
Pinsetters Brunswick
|
|
We buy our CC belts from Bowl-Mart and have had no slipping problems.
|
|
Pinspotters AMF
|
|
thank u bill. checked shaft, doesn't look bent. i'm looking closer to see what i can find. wondering if maybe latch itself bent??? but I can't see that happening. although ya never know
|
|
Pinspotters AMF
|
|
Hey thanks for all the replies !! I am always concerned with the geometry of the parts....
|
|
Pinspotters AMF
|
|
Originally Posted By: allensummittOriginally Posted By: ScttHrvyI wrap the cushion with old carpet material and lace it at the top, thru the curtain. Takes care of exposed rivet problems plus acts as a nice "container" for broken rivets and
|
|
Pinspotters AMF
|
|
not sure what to do every so often i have a spotting latch that won't engage when i go to press down its stuck thanks
|
|
Pinspotters AMF
|
|
Looks like Bowling Factory Outlet has one out also.
|
|
AMF Scoring Systems Discussion
|
|
I was thinking maybe its a bad CWC or even bad boards in your chassis? But im also intrested to see the end result to this problem.
|
|
AMF Scoring Systems Discussion
|
|
I was thinking maybe its a bad cwc or even bad boards in your chassis? But im also intrested to see the end result to this problem
|
|
Pinspotters AMF
|
|
I have never had a problem either way. The only problem i have had is when they get grooves in them and get dirty.
|
|
Pinspotters AMF
|
|
Like I said, I'm sure it doesn't matter. That's just the way I've always done it. I wonder what Jerry thinks......
|
